D-RX 250 Combined probe sensor
D-RX 250 Combined probe sensor
D-RX 250 is a certified dust monitor, combined with a flow, temperature and absolute pressure measurement for monitoring of small to medium dust concentrations in dry flue gas and process gas.
Single rod measurement probe for simultaneous measurement of: *Dust concentration [mg/Nm³]*, *Volume flow [Nm³/h]*, *Temperature [°C]*, *Absolute pressure [hPa]*.
Only one probe / mounting hole in the exhaust duct. Allows calibration to measure the dust concentration in mg/m3. Compact design, no moving parts, no consumables. Allows calibration to flow in m3/h. LCD displays measured values. 4 analog output signals. Parameters are set at the control device without a PC. Control and evaluation unit can be located in a distance up to 1000 m.
Suitable for dust mass concentration measurement at:
Incineration in general ● Installations according 2000/76/EC WID / 17 BImschV ● Garbage, hazardous waste incinerators ● Facilities for cement production ● Iinstallations according 2001/80/EC LCPD / 13 BImschV / Clean Air Act ● Power stations with gas, oil, coal or co-firing ● Installations for the incineration of biomass ● Facilities pursuant to 27th BImschV.
Specifications
0 ... 9,999,999 Nm³/h
0 ... 200°C, optional 0 ... 350°C
800 ... 1,300 hPa
Flow: Differential pressure
Electronics: 22 kg
Downloads
Features:
- Only one probe/ installation opening in the exhaust gas channel
- Compact design
- No moving parts
- Automatic zero and reference point check
Applications:
- For measurements in accordance with TI Air (Technical Instructions for Maintaining Air Purity), 13., 17. and 27. BImSchV
- Not suitable for use directly behind electrostatic filters.