GM32 NH3, NO, NO2, SO2 in situ gas analyser
GM32 NH3, NO, NO2, SO2 in situ gas analyser
GM32 – Measure aggressive gases directly and quickly, even in ATEX zones
The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, as well as TRS components in Kraft pulp processes including pressure and temperature in the gas duct. Direct, fast and without gas sampling and transport. This means control systems are able to work with actual values in real time. Thanks to self-monitoring the measured value are reliable at any time. In case of a malfunction an early warning will be shown. For emission measurement of SO2 and NO, GM32 is tested for suitability according to European standard EN 15267-3. An ATEX version with comprehensive safety functions and sophisticated system technology is also available, as well as the GM32 TRS-PE (PE = Pulp Emission) for TRS measurement in Kraft pulp processes.
Specifications
NO: 0 ... 40 ppm / 0 ... 1.900 ppm
NO2: 0 ... 50 ppm / 0 ... 1.000 ppm
SO2: 0 ... 15 ppm / 0 ... 7.000 ppm
Measuring ranges refer to 1 m measuring path
Ex-version: IP65
II 3G Ex pz [op is] IIC T3 Gc
27.BImSchV, 30. BImSchV, TA-lucht,
EN 15267, EN 14181, MCERTS,
GOST
Per module, modules can be selected and extended as required
Per module, modules can be selected and extended as required
Per module, modules can be selected and extended as required
Per module, modules can be selected and extended as required
NO: ≥ ± 0.8 ppm
NO2: ≥ ± 2.5 ppm
SO2: ≥ ± 0.3 ppm
Relative to the smallest measuring range
Downloads
Brochures
Video
Features:
- Direct, fast in-situ measurement
- No gas sampling, no gas transport, no gas conditioning
- Up to eight measuring components at the same time, plus process temperature and pressure
- DOAS and CDE evaluation process
- Numerous independent measuring ranges with consistent accuracy
- Automatic self-test function (QAL3) without test gases
- Overpressure encapsulated design for ATEX Zones 1 and 2
Benefits GM32 NH3, NO, NO2, SO2 in situ gas analyser :
- Measured values in real time without altering the gas composition
- Short-term process deviations are detected
- Representative measurement byselection of cross-duct or measuring probe versions
- Fast on-site service due to modular design
- Long maintenance-free intervals
- Cost-effective in-situ gas analyzer — also in ATEX design
- Low cost of installation and operation, no test gases required
- Complete emissions measurement in Kraft pulp process by way of simultaneous measurement of TRS components plus SO2, NO, NH3
Applications:
- For monitoring and control in flue gas purification,such as denitrification plants, desulfurization plants and converters
- Emissions monitoring according to EU directives or local regulations
- Monitoring of landfill gases
- Monitoring tasks, for example, in nitric acid and ammonia production processes
- TRS emissions monitoring in the Kraft pulp industry
