DUSTHUNTER SB30 Dust measuring device
DUSTHUNTER SB30 Dust measuring device
DUSTHUNTER SB30 – Dust monitor based on scattered light technology
The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases. Measurement is based on the tried-and-tested measurement principle of backward light scattering. Installation is easy and is only carried out on one side of the channel. Two different penetration depths are possible for adapting the measuring device to various channel diameters.
Specifications
Measuring range
0 ... 30 SI / 0 ... 3.000 SI
Measuring ranges freely selectable, three measuring ranges pre-configured (0 ... 30/500/3.000 SI)
Measuring ranges freely selectable, three measuring ranges pre-configured (0 ... 30/500/3.000 SI)
Measuring principle
Scattered light
Ambient temperatures
–40 °C ... +60 °C
Interfaces
Via MCU: USB 1.1 / RS-232 / RS-485 / Ethernet
Bus protocol
Via MCU: Modbus TCP / OPC / SOPAS ET / Modbus RTU / PROFIBUS DP
Protection class
IP66
Conform
TUEV type-examination
China's EPA compliant
China's EPA compliant
Channel diameter
≥ 500 mm
Supply voltage
24V via MCU control unit or an external power supply
Analogue outputs
1x 0/2/4 ... 20mA, max. load 750Ω;
Electrically isolated
Electrically isolated
Digital outputs
3 relay contacts: 48V, 1 A
Potential-free, for status signals
Potential-free, for status signals
Digital inputs
2 potential-free contacts:
For external maintenance switch, automatic self-test or linearity measurement
For external maintenance switch, automatic self-test or linearity measurement
Accuracy
≤ 2 % Of measuring range full scale
EN14181 QAL1 certificate
Yes
EN 15267-3 certificaat
Yes
Response time
1 s ... 600 s Freely adjustable via SOPAS ET software
Measuring gas temperature
–40 °C ... +600 °C
Weight
7 kg
Electrical safety
CE
Downloads
Brochures
Video
Multi Instruments Analytical / Sick Dusthunter SP100
Features:
- For small to medium dust concentrations
- Easy mounting on one side
- Automatic control of zero and reference point
- For medium to large duct diameters
Benefits:
- Easy installation, commissioning and operation
- Reliable measurement independent of gas velocity, humidity and dust load
- Cost effective thanks to simple installation on only one side, no alignment required
- Low maintenance thanks to self-monitoring
- Maintenance notifications (if necessary)
Applications:
- Emissions monitoring in industrial plants including, for example, power plants, heating systems, waste incineration plants, in steel production, and in cement plants
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurements in flue gas ducts upstream and downstream of dust filters
