DUSTHUNTER SP100 Dust measuring device
DUSTHUNTER SP100 Dust measuring device
DUSTHUNTER SP100 – The type-approved dust monitor with measuring probe
The DUSTHUNTER SP100 is a type-approved measuring device with measuring probe for dust at very low to medium concentrations. It is ideal for thick-walled or double-walled ducts because of the one-sided installation. The measurement is based on the forward scattering of light. An automatic check of zero and reference point as well as a contamination monitoring is integrated in the device.
Specifications
Measuring range
0 ... 5 mg/m³ / 0 ... 200 mg/m³
Higher measuring ranges on reques
Higher measuring ranges on reques
Measuring principle
Scattered light
Ambient temperatures
–40 °C ... +60 °C
Interfaces
USB 1.1 / RS-232 / RS-485 / Ethernet
Bus protocol
Modbus TCP / OPC / SOPAS ET / Modbus RTU / PROFIBUS DP
Protection class
IP66
Conform
2001/80/EC, 2000/76/EC,
27.BImSchV, TA-Luft, EN 15267,
EN 14181, MCERTS, 2010/75/EU,
U.S. EPA PS-11 compliant
27.BImSchV, TA-Luft, EN 15267,
EN 14181, MCERTS, 2010/75/EU,
U.S. EPA PS-11 compliant
Channel diameter
≥ 0,25m
Supply voltage
90 ... 250V AC / 47 ... 63 Hz (version with 24V DC available as an option)
Analogue outputs
3x 0/2/4 ... 20mA, max. load 750Ω;
Electrically isolated, two additional outputs if using I/O modules (option)
Electrically isolated, two additional outputs if using I/O modules (option)
Analogue inputs
2x 0 ... 20mA
Not electrically isolated, two additional inputs if using I/O modules (option)
Not electrically isolated, two additional inputs if using I/O modules (option)
Digital outputs
5 relay contacts: 48V, 1 A
Potential-free, for status signals
Potential-free, for status signals
Digital inputs
4 potential-free contacts
Accuracy
≤ 2 % Of measuring range full scale
EN14181 QAL1 certificate
Yes
EN 15267-3 certificate
Yes
Response time
1 s ... 600 s Freely adjustable
Measuring gas temperature
–40 °C ... +220 °C
Insertion length
435/735/1035/1335mm, length depending on the variant
Dimensions (H x W x D)
180 x 180 x 185mm
Purge air connection
Ø 25mm
Weight
6.5/7.8/9.5/11 kg (depending on the variant)
Electrical safety
CE
Downloads
Features:
- One-side installation
- For very low to medium dust concentrations
- Automatic check of zero and reference point
- Contamination check
- Hastelloy probe available for corrosive gas environments
- For small to medium duct diameters
Benefits:
- Ideal for thick- or double-walled ducts
- Approved according to EN 15267
- Low maintenance due to self-monitoring and contamination check
- Quick installation – no alignment required
Applications:
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurements in exhaust gas or exhaust ventilation ducts